Xerox Phaser 6110MFP - Manual (Page 72)

Installing Printer Software in Windows
4
1
Installing Printer
Software in Windows
This chapter includes:
• Installing Printer Software
• Removing Printer Software
Installing Printer Software
You can install the printer software for local printing . To install
the printer software on the computer, perform the appropriate
installation procedure depending on the printer in use.
A printer driver is software that lets your computer
communicate with your printer. The procedure to install drivers
may differ depending on the operating system you are using.
All applications should be closed on your PC before beginning
installation.
Installing Software for Local Printing
A local printer is a printer directly attached to your computer
using the printer cable supplied with your printer, such as a USB
cable. You can install the printer software using the typical or
custom method.
N OTE : If the “New Hardware Wizard” window appears during
the installation procedure, click in the upper right corner of
the box to close the window, or click Cancel.
Typical Installation
This is recommended for most users. All components necessary
for printer operations will be installed.
1
Make sure that the printer is connected to your computer
and powered on.
2 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type RunX:\Setup.exe.
If the AutoPlay window appears in Windows Vista, Click
Run Setup.exe in Install or run program field, and
click Continue in the User Account Control window.
3
Click Install Software.
4 Select Typical. Click Next.