Xerox Phaser 6110MFP - Manual (Page 74)

Installing Printer Software in Windows
6
N OTE : If your printer is not already connected to the
computer, the following window will appear.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
5
Select the components to be installed and click Next.
N OTE : You can change the desired installation folder by
clicking [Browse].
6
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 9.
7
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
8
Click Finish.
Removing Printer Software
1
Start Windows.
2
From the Start menu select Programs or All Programs →
your printer driver name → Maintenance.
3
Select Remove and click Next.
You will see a component list so that you can remove any
item individually.
4
Select the components you want to remove and then click
Next.
5
When your computer asks you to confirm your selection,
click Yes.
The selected driver and all of its components are removed
from your computer.
6
After the software is removed, click Finish.