Xerox Phaser 6110MFP - Manual (Page 7)

ii
• Do not use aerosol cleaners, they may be explosive and flammable
under certain conditions
• Always exercise care when moving or relocating equipment. Please
contact your local Xerox Service Department to arrange relocation of
the copier to a location outside of your building.
• Always locate the machine on a solid support surface (not on plush
carpet) that has adequate strength to support the weight of the
machine.
• Always locate the machine in an area that has adequate ventilation
and room for servicing.
• Always unplug this equipment from the electrical outlet before
cleaning.
• NOTE: Your Xerox machine is equipped with an energy saving device
to conserve power when the machine is not in use. The machine may
be left on continuously.
• WARNING: The metallic surfaces in the fuser area may be hot.
Please use caution when removing paper jams from this area and
avoid touching any metallic surfaces
Do Not Do These
• Never use a ground adapter plug to connect the equipment to a power
outlet that lacks a ground connection terminal.
• Never attempt any maintenance function that is not specifically
described in this documentation.
• Never obstruct ventilation openings. They are provided to prevent
overheating.
• Never remove covers or guards that are fastened with screws. There
are no operator serviceable areas within these covers.
• Never locate the machine near a radiator or any other heat source.
• Never push objects of any kind into the ventilation openings.
• Never override or "cheat" any of the electrical or mechanical interlock
devices.
• Never place this equipment where people might step on or trip on the
power cord.
• This equipment should not be placed in a room unless proper
ventilation is provided. Please contact your local Authorized dealer
for further information.
Warning - Electrical Safety Information
1 The power receptacle for the machine must meet the requirements
stated on the data plate on the rear of the machine. If you are not sure
that your electrical supply meets the requirements, please consult your
local power company or an electrician for advice.
2 The socket outlet shall be installed near the equipment and shall be
easily accessible.
3 Use the power cable that is supplied with your machine. Do not use an
extension cord or remove or modify the power cord plug.
4 Plug the power cable directly into a correctly grounded electrical outlet.
If you are not sure whether or not an outlet is correctly grounded,
consult an electrician.
5 Do not use an adapter to connect any Xerox equipment to an electrical
outlet that lacks a ground connection terminal.
6 Do not place this equipment where people might step or trip on the
power cable.
7 Do not place objects on the power cable.
8 Do not override or disable electrical or mechanical interlock devices.
9 Do not push objects into slots or openings on the machine. Electrical
shock or fire may result.
10 Do not obstruct ventilation openings. These openings are used to
provide proper cooling to the Xerox machine.
11 Disconnect Device: The power cable is the disconnect device for this
equipment. It is attached to the back of the machine as a plug-in device.
To remove all electrical power from the machine, disconnect the power
cable from the electrical outlet
Electrical Supply
1 This product shall be operated from the type of electrical supply indicted
on the product's data plate label. If you are not sure that your electrical
supply meets the requirements, please consult your local power
company for advice.
2 WARNING: This equipment must be connected to a
protective earth circuit. This equipment is supplied with a plug that has a
protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace the outlet.
3 Always connect equipment to a correctly grounded power outlet. If in
doubt, have the outlet checked by a qualified electrician.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to
the back of the machine as a plug-in device. To remove all electrical power
from the equipment, disconnect the power cable from the electrical outlet.
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and
disconnect the power cable(s) from the electrical outlet(s). Contact an
authorized Xerox Service Representative to correct the problem:
• The equipment emits unusual odors or makes unusual noises.
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has been
tripped.
• Liquid is spilled into the machine.
• The machine is exposed to water.
• Any part of the machine is damaged