Zoom G2.1NU - Manual (Page 48)

48
Effect Types and Parameters
ZOOM G2Nu/G2.1Nu
EarlyRef (early reflections)
This effect reproduces only the early reflections of reverb.
PARM1 PARM2 PARM3
Decay 1–30 Shape −10–10 Mix 0–100
Adjusts the duration of the reverb. Adjusts the effect envelope. When
negative, it is reversed. At 0, the
effect is a gate reverb. When
positive, it is a decay-type.
Adjusts the amount of effected
sound that is mixed with the
original sound.
MultiTapD (Multi-tap delay)
This effect produces several delay sounds with different delay times.
PARM1 PARM2 PARM3
Time
1–3000 mS
PTTRN (pattern) 1–8 Mix 0–100
Sets the base delay time. Sets the tap pattern, which varies
from rhythmical to random
patterns.
Adjusts the amount of effected
sound that is mixed with the
original sound.
TOTAL module
Sets parameters for the entire patch.
PatchLvl (patch level)
Sets the overall volume for the patch.
PARM1
P-LVL (patch level) 2–100
Sets the overall patch volume.
RTM (real time modulation)
Sets the module/parameter controlled by the expression pedal (→P27).
PARM1 PARM2 PARM3
DEST (control destination) MIN (minimum value) MAX (maximum value)
Sets the module controlled by the
expression pedal.
Sets the value sent to the
parameter when the pedal is fully
up.
Sets the value sent to the
parameter when the pedal is fully
down.
PatchName
Changes the patch name (→P20).