Zoom G2.1NU - Manual (Page 47)

47
Effect Types and Parameters
ZOOM G2Nu/G2.1Nu
ReverseDL (reverse delay)
This reverse delay is a long delay with a maximum length of 2500 mS.
PARM1 PARM2 PARM3
Time
10–2500 mS
F.B (feedback) 0–100
Bal (balance)
0–100
Sets the delay time. Adjusts the feedback amount. Adjusts the balance between
original and effect sounds.
REVERB module
This module has various reverbs, an early reflections effect and a multi-tap delay.
Hall
This reverb effect simulates the acoustics of a concert hall.
Room
This reverb effect simulates the acoustics of a room.
Spring
This reverb effect simulates a spring reverb.
Arena
This reverb effect simulates the acoustics of a large enclosure such as a sports arena.
TiledRoom
This reverb effect simulates the acoustics of a tiled room.
The 5 effect types above have the same parameters.
PARM1 PARM2 PARM3
Decay 1–30 Tone 0–10 Mix 0–100
Sets the duration of the
reverberations.
Adjusts the tone. Adjusts the amount of effected
sound that is mixed with the
original sound.