Zoom G2.1NU - Manual (Page 45)

45
Effect Types and Parameters
ZOOM G2Nu/G2.1Nu
CombFLTR (comb filter)
This effect uses the comb filter that results from fixing the modulation of the flanger like an equalizer.
PARM1 PARM2 PARM3
Freq (frequency)
1–50 Reso (resonance) −10–10 Mix 0–100
This sets the emphasized
frequency.
Adjusts the intensity of the
resonance sound of the effect.
Adjusts the amount of effected
sound that is mixed with the
original sound.
Air
This effect reproduces the ambience of a room to create spatial depth.
PARM1 PARM2 PARM3
Size 1–100 Tone 0–10 Mix 0–100
Sets the size of the space. Adjusts the tone. Adjusts the amount of effected
sound that is mixed with the
original sound.
Delay
The maximum delay of this effect is 2000 mS.
PARM1 PARM2 PARM3
Time
1–2000 mS
F.B (feedback) 0–100 Mix 0–100
Sets the delay time. Adjusts the feedback amount.
Higher values cause more delay
sound repetitions.
This adjusts the amount of the
effect sound that is mixed with the
original sound.
TapeEcho
This effect simulates a tape echo. Changing the "Time" parameter changes the pitch of the echoes.
PARM1 PARM2 PARM3
Time
1–1200 mS
F.B (feedback) 0–100 Mix 0–100
Sets the delay time. Adjusts the feedback amount.
Higher values cause more delay
sound repetitions.
Adjusts the amount of effected
sound that is mixed with the
original sound.