Zoom G2.1NU - Manual (Page 36)

36
Effect Types and Parameters
ZOOM G2Nu/G2.1Nu
RingMod (ring modulator)
This effect produces a metallic ringing sound. Adjusting the "Freq" parameter results in a drastic change of
sound character.
PARM1 PARM2 PARM3
Freq (frequency)
1–50 Tone 0–10 Bal (balance) 0–100
Sets the frequency of the
modulation.
Adjusts the tone. Adjusts the balance between
original and effect sounds.
SlowATTCK (slow attack)
This effect slows the attack of each note, resulting in a violin-like performance.
PARM1 PARM2 PARM3
Time 1–50 Curve 0–10 Level 2–100
Adjusts the attack time. Set the curve of volume change
during attack.
Adjusts the level of the signal after
it has passed through the module.
Octave
Adds an effect sound one octave below the unaffected sound.
PARM1 PARM2 PARM3
Tone 0–10
OctLV (octave level)
0 –100
DryLV
(dry level)
0–100
Adjusts the tone of the effect. Adjusts the volume of the effect. Adjusts the volume of the
unaffected sound.
PedalVox
This simulates a vintage Vox wah pedal.
PedalCry
This simulates a vintage CRYBABY wah pedal.
The two effect types above have the same parameters.
PARM1 PARM2 PARM3
Freq (frequency)
1–50 DryMX (dry mix) 0–10 Level 2–100
Adjusts the emphasized
frequency. When an expression
pedal is not used, the effect is
similar to a half open pedal.
Adjusts the mix with the
unaffected sound.
Adjusts the level of the signal after
it has passed through the module.