Zoom G2.1NU - Manual (Page 10)

10 ZOOM G2Nu/G2.1Nu
Using the Tuner
1. Set the unit to play mode
2. Set the unit to bypass/mute
Press both [▼]/[▲] foot switches at the same time.
When set to bypass/mute, the tuner becomes active.
■ To set the unit to bypass
After "Bypass/Tuner" appears on the screen, release the switches within one second.
■ To set the unit to mute
After "Bypass/Tuner" disappears and "Mute/Tuner" appears on the screen, release
the switches within one second.
Tuner type Drop tuning adjustment Standard pitch
NOTE
• If you continue to press both [▼]/[▲] foot switches for more than 2 seconds,
the looper becomes active (→P13).
• You cannot set the unit to bypass/mute from edit mode (→P18).
• When you press both [▼]/[▲] foot switches at the same time, the foot switch
that is momentarily pressed first could change the tone in some cases. Please
avoid making sound when pressing the switches.