Zoom G2.1NU User Manual
Page 12
12
Using the Tuner
ZOOM G2Nu/G2.1Nu
5. Drop tuning
6. Change the frequency of the tuner's standard pitch.
7. Return to play mode
You can tune a string 1 to 3 semitones lower than usual for drop tuning.
Turn Parameter knob 3 to lower the tuning one (
♭ ×1), two ( ♭ ×2) or three ( ♭ ×3) semitones.
Turn Parameter knob 1.
Press either [▼]/[▲] foot switch.
The standard pitch of middle A can be set in a range from 435–445 Hz.
(Default value: 440 Hz)
As shown in the illustration at right, if the tuning is lowered by one semitone (
♭ ×1)
when using the "GUITAR" tuner type, E
♭ is shown as the correct pitch when tuning
the 6th string.
NOTE
If you change the standard pitch in tuner mode, the setting is reset to the default
value whenever the power is turned OFF and ON again.
If you want this setting to be saved, set it using the global parameters (→ P30).
NOTE
Drop tuning cannot be used with the CHROMATIC tuner.
Drop tuning
Standard pitch