Zoom G2.1NU - Manual (Page 32)

32 ZOOM G2Nu/G2.1Nu
Upgrading the Firmware Version
1. Download the latest version upgrade
application from the ZOOM website
(http://www.zoom.co.jp/).
You must connect the unit to a computer to
upgrade the version.
HINT
See the previous page for how to confirm the
current version.
2. Confirm that the POWER switch is set to
"OFF." While pressing both [▼]/[▲] foot
switches, connect the unit to a computer
using the USB cable.
If connection with the computer is successful, the
following message appears on the display.
3. Launch the version upgrade application,
and conduct the version upgrade.
See the ZOOM website for the upgrade
procedures. When you complete the version
upgrade, "Please Restart" appears on the screen.
NOTE
Do not disconnect the USB cable during the ver-
sion upgrade process.
4. When the version upgrade is complete,
disconnect the USB cable and turn the
power OFF.
Turn the power ON again in the usual manner,
and the unit will start operating with the new
version.
USB cable
Computer