Using the looper, Activate the looper 2. set the recording time, Adjust the tempo – Zoom G2.1NU User Manual
Page 13
13
ZOOM G2Nu/G2.1Nu
■ Note mark
Set the recording time by setting the tempo and the number of quarter notes. For
example, the recording time is two beats at the current tempo when set to "
♩ ×2."
■ Manual
Use the foot switch to start and stop recording.
Using the Looper
1. Activate the looper
2. Set the recording time
In play mode, press both [▼]/[▲] foot switches until "LOOPER"
appears on the screen.
Turn Parameter knob 1 to select the recording time.
Tempo
Volume of
recorded phrase
Recording time
NOTE
When the looper is activated, the DELAY module is turned OFF.
Tempo can be set in a range from 40–250 BPM (beats per minute). If you selected a note
mark in step 2, recording time is calculated according to the tempo.
3. Adjust the tempo
Turn Parameter knob 2 to set the tempo.
HINT
You can also adjust the tempo using the TAP key (→P17).
Record time
Tempo