Zoom G2.1NU - Manual (Page 15)

15
Using the Looper
ZOOM G2Nu/G2.1Nu
Over-
dubbing
Loop
playback
Loop
playback
Playback
Recording
[▲] foot
switch
[▲] foot
switch
HINT
To stop loop playback, press the [▼] foot switch ("STOP" appears on
the display). To start loop playback again, press the [▲] foot switch.
6. Adjust the phrase volume
7. Erase the phrase
8. Return to play mode
Turn Parameter knob 3.
The setting range is 0–100.
Press the [▼] foot switch until "CLEAR" appears on the display
to erase the recorded phrase.
PRESS both [▼]/[▲] foot switches.
NOTE
Please note that if you turn Parameter knob 1 or 2 when a phrase has
already been recorded, that phrase will be erased.
To end overdubbing, press the [▲] foot switch again.
"PLAY" appears on the display.
PHRASE volume