Xerox 8850 - Manual (Page 83)

XEROX WIDE FORMAT COPY SYSTEM Special features keys
• 77
TRANSFORM
MIRROR: OFF
INVERT: OFF
4. Press the Next key to highlight INVERT.
5. Press the Enter key to select INVERT.
6. Press the Previous or Next key to turn the option ON or OFF.
7. Press the Enter key to confirm your choice. The graphical
display updates accordingly.
When INVERT is ON, the icon on the right side of the TRANSFORM
screen is inverted. The example below shows the TRANSFORM screen
with INVERT turned ON.
TRANSFORM
MIRROR OFF
INVERT ON
NOTE: To cancel your choice, press the Exit key.
8. Press the Exit key to return to the READY screen.
Sample key
The Sample key allows you to print a sample of a scanned image in both
the COPY mode and the SCAN mode. You can then check the sample
for quality or observe the results of features or copy quality adjustments
before document is copied or scan to a file.
The dimensions of the sample, in the Copy mode, are the width of the
page by 210 mm. The sample is taken from a point equidistant from the
lead and trail edge of the image. Refer to Copy Mode below for
instruction to print a sample.
In the SCAN mode the sample size is the whole document. To enable
the Sample key in the SCAN Mode, the Scan-to-net feature must be
installed. To enable a print sample the Scan-to-print feature key must be
installed. Refer to Scan Mode Sample below for instruction
s to print a
sample.
To print a sample of a scanned image:
1. Press the Sample key. The Sample indicator lamp illuminates.
The Scanner Control Panel is placed in Printer Interrupt mode
Copy Mode Sample: