Xerox 8850 - Manual (Page 65)

XEROX WIDE FORMAT COPY SYSTEM Special features keys
• 59
2. Press the Enter key to select LAST JOB. The LAST JOB menu
screen is displayed. The selected option is highlighted.
LAST JOB
RECALL LAST JOB
DELETE LAST JOB
3. Press the Previous or Next key to highlight the desired option.
4. Press the Enter key to select the highlighted option. The screen
for the selected option is displayed.
Use the RECALL LAST JOB option to recall the information from the last
job.
To recall the last job information:
1. Press the Store/Recall key. The Store/Recall menu screen is
displayed.
2. Press the Enter key to select LAST JOB. The LAST JOB menu
screen is displayed.
3. Press the Enter key to select RECALL LAST JOB. The screen
shown below is displayed.
COPIER PARAMETERS AND IMAGES
FOR LAST JOB RECALLED
PRESS ENTER TO
CONTINUE
4. Press the Enter key to return to the READY screen.
You can now use the settings as they have been recalled, or you can
change one or more of them.
NOTE: The recalled job must be printed or cleared before the next
document can be scanned. If there is no last job to be restored, as is the
case at power up or after the last job has been deleted, a warning
message will advise you.
If, for security reasons, the parameters and images of the last job should
not be left stored, use the DELETE LAST JOB option.
To delete the information from the last job:
Recalling the Last Job
Deleting the Last Job