Xerox 8850 User Manual
Page 19
XEROX WIDE FORMAT COPY SYSTEM
Getting to know the WIDE FORMAT COPY SYSTEM
• 13
PRESET OUTPUT FORMAT
SELECT:
8.5 X 11 ANSI A
2. Press the Previous or Next key to select an item from the list.
NOTE: Formats can be added or removed from this list. Refer to
"Custom Media Formats" in the "Main Menu" section for more
information.
3. Press the Enter key to confirm the choice and return to the
READY screen.
Synchro
When the Synchro mode is selected, the length of the original is
measured as it passes through the Scanner and automatically cuts the
media at the Printer to match the length of the original document.
Synchro is the factory default. To select the Synchro mode, press the
key beneath Output Formats until the Synchro indicator lamp
illuminates.
The Image Quality area of the Scanner Control Panel allows you to
make corrective adjustments to the image and extract the best possible
copy quality from an original document. It contains the Type,
Background Suppression, and Copy options.
The illustrations below depict the Image Quality portion of the Control
Panel for AccXES software version 10.0 and SCAN SYSTEM firmware
version 3.2.5 or higher.
Image Quality Area