Xerox 8850 - Manual (Page 36)

30
•Getting to know the WIDE FORMAT COPY SYSTEM
XEROX WIDE FORMAT COPY SYSTEM
Powering off the System
To power off the WIDE FORMAT COPY SYSTEM, do the following:
1. Power off the Controller and the Printer.
•
For the 8825/8830/8850/510 Series, switch the Circuit Breaker
Switch to the Off (O) position. Then switch the Print er Switch to
the Off (O) position.
•
For the 721P, first power off the Printer. Then power off the
Controller.
2. Switch off the Scanner by pressing the Power On/Off Switch on
the back of the Scanner to the Off (O) position as shown below.