Xerox 8850 - Manual (Page 130)

124
•Main Menu
XEROX WIDE FORMAT COPY SYSTEM
The CLEAR SCANNER FAULT LOG option is for use by the Customer
Service Engineer only and requires the entry of the diagnostic password.
It allows the Customer Service Engineer to erase the contents of the
Scanner Fault Log.
If you select this option, the CLEAR SCANNER FAULT LOG screen is
displayed. You cannot perform any functions in this screen. Press the
Exit key to return to the SCANNER DIAGNOSTICS menu screen.
Below is an illustration of the CLEAR SCANNER FAULT LOG screen.
CLEAR SCANNER FAULT LOG
WARNING: THIS FUNCTION
DESTROYS ALL LOG MESSAGES
EXECUTE: NO
The CLEAR CAL ZONE (Clear Calibration Zone) provides the user with
a quick way to move the Calibration Motor to the cleaning position. There
are two selections CLEANING POSITION AND HOME POSITION.
CLEAN CAL ZONE
POSITION: CLEANING POSITION
The COMPONENT TESTS option of the SCANNER DIAGNOSTICS
menu provides a sub-menu of the following menu choices:
•
MOTOR SPEED - Enables the Customer Service Engineer to
adjust the Scanner motor speed and correct magnification errors
in the process direction. The diagnostic password is required for
this function.
•
LEAD EDGE/TRAIL EDGE - Enables you to execute the lead
edge/trail edge diagnostic.
•
SENSORS - Enables you to display the current state of the
Scanner optical paper sensors and the thick document sensor.
•
MOTOR COMMUNICATIONS - Enables a document motor
communications loopback test to assist in diagnosing a scanner
problem.
•
DOCUMENT MOTOR - Enables you to stop and start the
document handler motor.
CLEAR SCANNER
FAULT LOG
CLEAN CAL ZONE
COMPONENT TESTS