Printing procedure, Printing procedure -2, Create or open the document select print options – Xerox M15 User Manual
Page 98
Page 7-2
Xerox WorkCentre M15/M15i User Guide
Pr
in
t
Printing Procedure
Use this procedure to create and print a document using a Windows application on a PC. The
steps provided should be used as a guide and may vary depending on the application being
used.
l
For further
information, refer
to the
documentation
provided with the
software
application.
Prior to printing from a PC, ensure the WorkCentre M15/M15i is connected to the computer
correctly. Printer Driver software must be loaded on the PC to enable printing.
The WorkCentre M15/M15i should be powered on and paper loaded in one of the paper trays.
Create or Open the Document
Select Print Options
1
Ø
Open the application required for
the document.
Ø
Select an existing document or
create a new document.
2
Ø
Select [Print] from the [File]
menu.
Ø
Ensure the WorkCentre 15 Series
is selected as the default printer.
Ø
Select [Properties] or [Setup] and
change the settings required.
Ø
Select [OK] to close the
properties dialog box.