Xerox M15 - Manual (Page 111)

Xerox WorkCentre M15/M15i User Guide Page 9-3
Mac
hi
ne A
dm
ini
st
ra
tio
n System Data Settings
OPTION SETTINGS DESCRIPTION
Paper Size
l Use to set the default
paper size for the cassette
and bypass tray.
Cassette Paper Paper Size options are Letter, A4, or Legal (216 x 356
mm / 8.5 x 14 inch).
i If feeding media smaller than A4/Letter through the
bypass tray, the setting can remain set at A4, Letter or
Legal size.
When copying onto a paper size smaller than A4/
Letter, the printed image may be offset and not
reproduce correctly, even when Auto Fit is selected.
Bypass Paper
Message Conf.
l Use to set the options for
printing a transmission
report. A transmission
report provides detailed
information about outgoing
fax jobs.
ON Use to print a transmission report after each outgoing
fax job.
OFF Use to switch off the transmission report feature.
ERR Use to print a transmission report for outgoing fax
jobs which encounter errors.
Auto Journal
l Use to enable a report with
detailed information about
the previous 40
communications
operations.
ON Set to ON to enable the Auto Journal report.
OFF Set to OFF to switch off the Auto Journal report.
Receive Code
l Use to setup up the code
required to initiate fax
reception from an
extension phone plugged
into the machine’s EXT
jack.
[0 - 9] > *9* The Rcv Code is preset to *9* at the factory. Settings
range from 0 to 9.
If the extension phone is answered and fax tones can
be heard, enter the Rcv Code and press [Start].
Power Save
l Enables reduced power
usage when the machine is
idle.
ON Use to set the length of time the machine remains idle
before switching to reduced power.
OFF Use to switch off the Power Save feature. The
machine remains ready with a minimum warm-up
time.