Xerox M15 - Manual (Page 119)

Xerox WorkCentre M15/M15i User Guide Page 9-11
Mac
hi
ne A
dm
ini
st
ra
tio
n Setting the Date and Time (M15i Only)
l The clock format
can be set to 12
or 24 hr. Refer to
“System Data
Settings” on page
9-3. The current time and date are shown on the display when the machine is on and ready for
faxing. The time and date are printed on all faxes sent. Follow the instructions below to set the
date and time.
l If a mistake is
made, move the
cursor under the
incorrect
character by
pressing
or
.
If an invalid
number is
entered the
machine beeps
and does not
proceed to the
next step. Re-
enter the correct
number to
proceed.
1
Ø Press [Menu/Exit], the first menu
displays.
SYSTEM DATA
[PAPER SIZE...]
WorkCentre M15i
2
Ø Scroll to ’DATE & TIME’ using the
or key.
Ø Press [Enter].
DATE & TIME
DDMMYY HH:MM
WorkCentre M15i
3
Ø Enter the correct date and time
using the Numeric Keypad:
Day = 01 ~ 31
Month = 01 ~ 12
Year = 00 ~ 99
Hour = 00 ~ 23 (24-hour mode)
= 01 ~ 12 (12-hour mode)
Minute = 00 ~ 59
The date and time format is:
DD = Day
MM = Month
YY = Year
HH = Hour
MM = Minute
Ø Press [Enter] when the correct
date and time displays.
Ø Press [Menu/Exit] to save and
exit.
11-12-2002
15:00
WorkCentre M15i