Loading the bypass tray – Xerox M15 User Manual
Page 68
Page 5-6
Xerox WorkCentre M15/M15i User Guide
P
ap
er
and
O
the
r M
edi
a
Loading the Bypass Tray
l
Remove any curl
on postcards,
envelopes, and
labels before
loading them into
the Bypass Tray.
l
Hold
transparencies by
the edges and
avoid touching
the print side.
1
Ø
Lower the Bypass Tray, located
on the right side of the product.
Ø
Unfold the paper support
extension.
2
Ø
Prepare a stack of paper or
envelopes for loading by flexing
or fanning them back and forth.
Straighten the edges on a level
surface.
3
Ø
Load the print material with the
print side facing down and
against the right edge of the tray.
This manual is related to the following products: