Xerox M15 User Manual
Page 88
Page 6-16
Xerox WorkCentre M15/M15i User Guide
Fa
x (M
15
i On
ly
)
Group Dialing
l
Use to assign multiple
Speed Dial numbers to a
single Group number for
broadcast transmissions.
Assigning
numbers
to a Group
Use to setup a
Group using
multiple Speed
Dial numbers.
Ø
Ensure the LCD displays FAX. If not, press the
[Copy/Fax/Scan] key until ’FAX MODE’ displays and
press [Enter].
Ø
Press [Menu/Exit]. ’SYSTEM DATA’ displays.
Ø
Press
or
until ’GROUP DIAL’ displays, then
press [Enter].
Ø
Press [Enter] to select ’NEW’.
Ø
Enter a Group number from Speed Dial locations 1 -
80 and press [Enter].
If the Group Dial number is already used, ’NO. IS
REGISTERED displays and another number must
be entered.
Ø
The display requests a Speed Dial number. Enter the
Speed Dial number to be included in the Group Dial
and press [Enter].
The Speed Dial number, fax number and name
displays.
Ø
Press [Enter].
Ø
Repeat the procedure to enter all the Speed Dial
numbers required for inclusion in the Group.
Ø
Press [Menu/Exit] when all the numbers have been
entered.
Ø
The displays requests an ID for the Group Dial. If
required, enter a name for the Group and press
[Enter].
Ø
If a name is not required, press [Enter].
Ø
To setup another Group Dial, repeat the procedure.
To exit press [Menu/Exit].