Xerox M15 - Manual (Page 112)

Page 9-4 Xerox WorkCentre M15/M15i User Guide
Mac
hi
ne Adm
in
is
tr
ati
on
ECM Mode
l Error Correction
Mode(ECM) compensates
for poor line quality.
ON Use to switch on ECM for all transmissions.
Transmission time may be increased when ECM is
enabled.
OFF Use to switch off ECM.
RX Reduction
l When receiving a
document as long or longer
than the paper loaded in
the machine, the size of the
document is reduced to fit
the paper size.
ON If the document can not be reduced to fit onto one
page, the document is divided and printed at actual
size on two or more pages. With Horizontal
Reduction enabled, the machine reduces an
incoming document along the vertical axis only.
OFF
Discard Size
l When receiving a
document as long as or
longer than the paper in
the machine, the fax
machine can be set to
discard any excess at the
bottom of the page.
[00 - 30] If the RX Reduction feature is turned OFF or fails,
and the received document is as long or longer than
the paper selected, the machine will discard any
excess image at the bottom of the page.
If the received page is outside the discard margin set,
it will print on two sheets of paper at the actual size.
Margins can be set between 0 - 30mm (1.2")
Redial Interval
l Sets the time between
redials if a remote fax
machine is busy.
[1 - 15] Intervals from 1 to 15 minutes can be entered.
Redials
l Use to specify the number
of redial attempts.
[0 - 13] Redial attempts can be entered from 0 to 9.
Answer On Rings
l Use to specify the number
of rings before answering
an incoming call.
[1 - 7] Between 1 and 7 rings can be set.
Send From Memory
l Sets all fax transmission
documents to be
automatically scanned into
memory.
ON With this option it is not necessary to wait until
documents are sent before sending or storing other
fax jobs.
OFF
OPTION SETTINGS DESCRIPTION