2 syslog and accounting – ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual
Page 202

Prestige 660RU-Tx Series User’s Guide
201
Chapter 24 System Information and Diagnosis
Figure 138 Sample Error and Information Messages
24.4.2 Syslog and Accounting
The Prestige uses the syslog facility to log the CDR (Call Detail Record) and system messages
to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System
Maintenance — UNIX Syslog, as shown next.
Figure 139 Menu 24.3.2 System Maintenance: Syslog and Accounting
You need to configure the UNIX syslog parameters described in the following table to activate
syslog then choose what you want to log.
52 Sat Jan 01 00:00:00 2000 PP12 INFO LAN promiscuous mode <1>
53 Sat Jan 01 00:00:00 2000 PP00 INFO Last errorlog repeat 1 Times
54 Sat Jan 01 00:00:00 2000 PP00 -WARN SNMP TRAP 0: cold start
55 Sat Jan 01 00:00:00 2000 PP00 INFO main: init completed
56 Sat Jan 01 00:00:00 2000 PP00 INFO Starting Connectivity Monitor
57 Sat Jan 01 00:00:00 2000 PP1c INFO monitoring WAN connectivity
58 Sat Jan 01 00:00:00 2000 PP0a WARN MPOA Link Down
59 Sat Jan 01 00:00:02 2000 PP09 -WARN SNMP TRAP 3: link up
60 Sat Jan 01 00:00:05 2000 PP1b INFO adjtime task pause 1 day
61 Sat Jan 01 00:01:36 2000 PP14 INFO SMT Password pass
62 Sat Jan 01 00:01:36 2000 PP00 INFO SMT Session Begin
63 Sat Jan 01 00:03:59 2000 PP00 WARN M1Save:Iface not found for DDNS
Clear Error Log (y/n):
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet Triggered= No
Filter Log= No
PPP Log= No
Press ENTER to Confirm or ESC to Cancel:
Table 63 Menu 24.3.2 System Maintenance : Syslog and Accounting
PARAMETER
DESCRIPTION
UNIX Syslog:
Active
Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
Syslog IP Address
Type the IP address of your syslog server.
Log Facility
Use [SPACE BAR] and then [ENTER] to select one of seven different local
options. The log facility lets you log the message in different server files. Refer to
your UNIX manual.