ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series - Manual (Page 181)

Prestige 660RU-Tx Series User’s Guide
Chapter 22 Filter Configuration 180
22.2 Configuring a Filter Set for the Prestige
To configure a filter set, follow the steps shown next.
1 Enter 21 in the main menu to display Menu 21 – Filter Set Configuration as shown
next.
Figure 118 Menu 21 Filter Set Configuration
2 Type the filter set to configure (no. 1 to 12) and press [ENTER] .
3 Type a descriptive name or comment in the Edit Comments field and press [ENTER].
4 Press [ENTER] at the message “ Press ENTER to confirm…” to display Menu 21.1 –
Filter Rules Summary (that is, if you selected filter set 1 in menu 21).
Figure 119 NetBIOS_WAN Filter Rules Summary
Menu 21 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 NetBIOS_WAN 8 _______________
3 NetBIOS_LAN 9 _______________
4 _______________ 10 _______________
5 _______________ 11 WebSet1
6 _______________ 12 WebSet2
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Menu 21.2 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- -------------------------------------------------------------- - -
1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137 N D N
2 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138 N D N
3 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139 N D N
4 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137 N D N
5 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138 N D N
6 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139 N D F
Enter Filter Rule Number (1-6) to Configure: