ZyXEL Communications XGS-4528F - Manual (Page 75)

Chapter 7 Basic Setting
XGS-4528F User’s Guide
75
7.3 General Setup
Use this screen to configure general settings such as the system name and time. Click Basic
Setting and General Setup in the navigation panel to display the screen as shown.
Figure 26 Basic Setting > General Setup
The following table describes the labels in this screen.
Threshold This field displays the minimum speed at which a normal fan should work.
Status Normal indicates that this fan is functioning above the minimum speed. Error
indicates that this fan is functioning below the minimum speed.
Voltage (V) The power supply for each voltage has a sensor that is capable of detecting and
reporting if the voltage falls out of the tolerance range.
Current This is the current voltage reading.
MAX This field displays the maximum voltage measured at this point.
MIN This field displays the minimum voltage measured at this point.
Threshold This field displays the percentage tolerance of the voltage with which the Switch still
works.
Status Normal indicates that the voltage is within an acceptable operating range at this
point; otherwise Error is displayed.
Table 9 Basic Setting > System Info (continued)
LABEL DESCRIPTION
Table 10 Basic Setting > General Setup
LABEL DESCRIPTION
System Name Type a descriptive name for identification purposes. This name consists of up to 64
printable characters; spaces are allowed.
Location Type the geographic location of your Switch. You can use up to 32 printable ASCII
characters; spaces are allowed.