beautypg.com

5 enabling rip – ZyXEL Communications XGS-4528F User Manual

Page 65

background image

Chapter 5 Initial Setup Example

XGS-4528F User’s Guide

65

5.1.5 Enabling RIP

To exchange routing information with other routing devices across different routing domains,
enable RIP (Routing Information Protocol) in the RIP screen.

1 Click IP Application and RIP in the navigation panel.
2 Select Both in the Direction

field to set the Switch to
broadcast and receive
routing information.

3 In the Version field, select

RIP-1 for the RIP packet
format that is universally
supported.

4 Click Apply to save your changes back to the run-time memory. Settings in the run-time

memory are lost when the Switch’s power is turned off.

EXAMPLE

See also other documents in the category ZyXEL Communications Computer Accessories: