Xerox 8160 - Manual (Page 56)

Printer Options 2-24 Reference Guide 8142/8160
Printer Options
Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting
2
Network settings
Your printer can be shared on a network. Network setup can be accomplished at your computer, but the IP
address, IP subnet mask, gateway, and DHCP client can also be set at the printer's control panel.
Note: do not change the default gateway.
DHCP
The DHCP protocol can be used to obtain a lease on an IP address. The print server will request a permanent
lease. If you are using DHCP to manage IP addresses, we recommend that permanent leases be assigned to your
print servers so that the IP address will not change. DHCP servers also normally provide the subnet mask and
gateway/router address information.
To set the IP address
1 Press Setup Menu/Network Menu/IP Config Menu/IP Address.
2 Enter IP address 192.0.0.193.
3 Press OK.
To set the IP subnet mask
1 Press Setup Menu/Network Menu/IP Config Menu/IP Subnet Mask.
2 Enter Subnet Mask 255.255.255.0.
3 Press OK.