Xerox 8160 - Manual (Page 37)

Printer Options 2-5 Reference Guide 8142/8160
Printer Options
Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting
2
Each quality mode includes presets for the following options: Color mode; DPI; Carriage speed; Pass correction;
Print passes and Print direction.
When you select User mode, you can set each of the print mode options individually.
Quality modes are summarized in the table which follows. It is not necessary to set all the parameters unless you
want to create a user-defined print mode.
Mode Color DPI Passes Direction Speed
High Speed Color 600 x 600 Two Bi 10
Productivity Color 600 x 600 Three Bi 10
Fine Color 600 x 600 Four Bi 10
Enhanced Color 600 x 600 Six Bi 10
Ultrafine Color 1200 x 600 Eight Bi 10
High Speed - This mode generally is used when speed is more important than quality. Use it to check position,
layout, color, etc. It will rarely be used for finished quality images.
Productivity - This setting is for fast, average quality.
Fine - Fast, better than average quality.
Enhanced - Fast, very good quality (default).
Ultrafine - Average speed, best print quality.
To choose print quality
1 Press Setup/Print Mode/Quality Mode.
2 Choose the desired quality.
3 Press OK.