Xerox 8160 - Manual (Page 54)

Printer Options 2-22 Reference Guide 8142/8160
Printer Options
Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting
2
Print settings
Pressing the Setup Menu/User Setup Menu/Print Settings buttons causes the printer to print a listing of its
current settings and configuration. Be sure to have media loaded before you start.
Return to default settings
Pressing the Setup Menu/User Setup Menu/Init Settings buttons returns all printer options to the factory
defaults. All saved user settings are lost. The table at the end of this chapter shows the printer defaults.
LCD contrast
The LCD Contrast function lets you adjust the brightness of the control panel. The range is 1-8, where 8 is less
contrast. The default is 4. Note that if brightness is set too high, you may not be able to see the text displayed on
the control panel.
To set LCD contrast
1 Press Setup Menu/User Setup Menu/LCD Contrast.
2 Choose the contrast value.
3 Press OK.