Wegener Communications 6420 - Manual (Page 63)

iPump 6420 User’s Manual
www.wegener.com 800070-01 Rev B Chapter 3, Page 59
Figure 3-15: Ops Logs screen, web interface
Diagnostic screen
From any of the normal web screens, if the user clicks on the WEGENER logo, in the upper
left corner, while pressing CRTL, then the user is sent to the web Diagnostics screen. This is a
fairly powerful diagnostic and debugging tool, and only advanced users should access this
screen. No other information is supplied in this publicly-accessible Manual about this screen. If
you are an advanced user, and you have questions, please contact WEGENER Customer Service
for more information.
User Controls
The user controls affecting the web interface are listed. Compel is the preferred command
method:
1. LAN IP settngs (IP address, netmask, and Gateway)
2. Allow or disallow local control. This affects many parameters needed to deliver the
audio output payload. Set by Compel or the factory.
3. Allow or disallow HTTP (web) access. Set by Compel or the factory.
4. Content access permission on/off. If ON, then local users may modify or delete
stored files.