Wegener Communications 6420 - Manual (Page 119)

iPump 6420 User’s Manual
www.wegener.com 800070-01 Rev B Appendix 2, Page 115
backupsoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS mandatory
::= { unitGroup 3 }
-- M_LOCAL_CONTROL_STATUS
localControlStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"Local control allows the local user to change unit settings. If
Local control is not enabled, certain unit settings may only be modified by
the uplink controls stream (Compel)."
::= { unitGroup 5 }
-- M_UNIT_LABEL
unitLabel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS mandatory
::= { unitGroup 6 }
-- M_INTERN_TEMP
internTemp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS mandatory
::= { unitGroup 8 }
-- M_MODEL_NUM
modelNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS mandatory
::= { unitGroup 9 }
-- M_USW_VERSION
uswVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS mandatory
::= { unitGroup 17 }
-- PCMI_GRP_TUNER (indexes: 0)
tunerGroup OBJECT IDENTIFIER ::= { pcmiData 2 }
-- M_AGC_STATUS
agcStatus OBJECT-TYPE
SYNTAX INTEGER {
good(0)
high(1)
low(2)