USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router User Manual
Page 188
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
pppoe
<-auth Auth> <-myaddr IPAddr> <-peer PeerIPAddr> <-mtu MTU> <-mru MRU>
<-hwaddr Ethaddr> <-service ServiceName> <-acname ACName> <-tag HostTag>
<-user Username> <-pass Password> <-vpi Vpi> <-vci Vci> <-mode Mode>
<-idletime idleTimeout> <-nat [enable/disable]> <-netmask mask> <-vpn OUI vpnId>
Sets up a PPPoE profile.
Profile Profile number to configure. Specify an integer number from 0 through 7.
-if
ppp2, ppp3, ppp4, ppp5, ppp6, ppp7
-encap
VC (VC Multiplexing).
-restarttime
-auth
-myaddr
-peer
Provider. Expressed in dot notation.
-mtu
-mru
-hwaddr
hardware addresses of the router are used for this. The address is specified with ‘:’ used as a
delimiter between byte values (eg 10:11:12:13:14:15).
-service
-acname
-tag
-user
-pass
-vpi
atmshowconn command.
-vci
atmshowconn command.
-mode
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (64 of 71) [11/6/2002 8:58:46 AM]