USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 167)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
igmp -o -routerif
igmp -o -deleteif
igmp -o -display
Used for configuring igmp proxy and router interfaces.
-proxyif Sets the proxy interface. Typically a LAN interface (eth0) is specified.
-routerif Sets the router interface. Typically a WAN interface (ATM0, PPP0) is
specified.
-deleteif Deletes either the proxy or router interface.
-display Displays the group in all interfaces.
1.23 qosc
The following commands are available in the “qosc” directory
1.23.1 addrule
addrule prority -o [-da address] [-sa address] [-p protocol] [-dp portNum] [-sp portNum]
[-tos serviceType] [-type icmp-types] [-flg tcp-flags] [-tc actionID] [-fw actionID]
The addrule command provides a mechanism to specify an action (Firewall or Traffic Conditioning)
to packets matching a user specified criteria. One or more of the following packet header fields can
be used in the specification criteria: destination IP address, source IP address, destination port,
source port, and protocol (TCP, UDP, or ICMP). Every rule must be associated with at least one
action. Before adding a rule, the specified action must already be available in the system.
The priority for this rule. Since there can be many rules configured and it is possible for a packet to
match several different rules, the priority is used to break ties. The priority values range from the
highest priority 0 to the lowest priority 65531. By default the minimum priority value (65535) is
assigned if the priority is not specified.
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (43 of 71) [11/6/2002 8:58:45 AM]