USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 169)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
lo af4 low priority traffic
df default
Optionally an operator may be specified so that many ports can be matched. The operators
supported are: <, >, =.
-flgs
This field represents the TCP flags SYN, URG, RST, FIN, ACK
-typ
ICMP packet types such as ECHO REQ, ECHO REPLY, DEST UNREACH etc
Note: To assign an Action ID to a rule, you must create or use an existing Action ID before using
AddRule command.
-tc
Packets matching the criteria specified in this rule will be processed with the specified Traffic
Conditioning action. The Traffic Conditioning action is identified by the action_id. The action_id
was returned by an addtc command.
-fw
Packets matching the criteria specified in this rule will be processed with the specified Firewall
action. The Firewall action is identified by the action_id. The action_id was returned by addfw
command.
Examples:
addrule 5 -o -sa 192.168.2.1/24 -da 192.168.3.4 -p tcp -dp <2334 -sp 4546 -tos ef -fw 3
Packets with a source IP address of 192.168.2.1, a destination address of 192.168.3.4, and using
a TCP destination port less than 2334 will have its TOS field marked with high priority and will be
processed by Firewall action #3.
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (45 of 71) [11/6/2002 8:58:45 AM]