USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 166)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
0xa0000000 - 0xbfffffff (hexadecimal)
< value >
0 - ffffffff (hexadecimal)
1.20.11 mread
mread < size >
Displays the Falcon 32 bit data memory.
0xa0000000 - 0xbfffffff (hexadecimal)
< size >
1 - 100 (decimal)
1.21 dhcpr
dhcpr start -o
dhcpr stop
dhcpr status
Configures the DHCP Relay function. The system acts as a proxy for DHCP requests. When
enabling the DHCP Relay, the address of the DHCP server is specified and DHCP requests are
relayed to the specified server. On enabling DHCP relay functionality, the DHCP server
functionality gets disabled (if it is enabled) and vice versa.
start -o Starts DHCP relay. The remote_server is the IP address of the DHCP
server.
Stop Disables or stops the DHCP relay service.
Status Shows the status of the DHCP Relay.
1.22 igmp
igmp -o -proxyif
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (42 of 71) [11/6/2002 8:58:45 AM]