USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router User Manual
Page 145
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
-subnet
-netmask
-startip
endip define this range with the beginning and ending IP addresses to be served. These
addresses are specified in dot notation.
-gateway
DHCP clients that they use for a default route entry. By default the IP address of this router is
passed to the DHCP clients as the gateway.
-leasetime
specified in days. The default is 7 days.
-broadcast
DHCP requests. By default, a standard broadcast address for the subnet is used.
-dns
By default, the dns address configured on the WAN interface from the Internet Service Provider
(via DHCP server or PPPoA/PPPoE) is used.
-server
go to the specified server to retrieve the specified file as the boot image. The 6489 based router
does not support storage of a file for a remote client to boot from, so the server specified will be
another machine on the network.
subnet if list
subnet if delete
Examples:
subnet add eth0 -o -subnet 192.168.5.0 -startip 192.168.5.200 -endip 192.168.5.210 \
-leasetime 3 -dns 192.168.5.7
IP addresses will be assigned to up to 11 DHCP clients. The IP addresses assigned will
begin with 192.168.5.200 and end with 192.168.5.210. The length of the IP address
assignment (the lease) is 3 days. The address of the DNS server (192.168.5.7) will also be
sent to the DHCP clients.
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (21 of 71) [11/6/2002 8:58:45 AM]