Uniden DECT1915 - Manual (Page 6)

Read these notes first
Choosing a site
for the base
unit and
charger pod The base unit and charger pod(s) should be placed on a
level surface, in a position where:
■ the mains adapter plug will reach an easily accessible
240-V
AC switched mains supply socket — never try
to lengthen the mains power cable
■ the base unit’s telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
■ it is not close to another telephone — this can cause
radio interference
■ it is not close to a sink, bath or shower, or anywhere
else where it might get wet
■ it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
! If you’re using the SMS text messaging facility,
please note that only one SMS phone connected to
the line can receive messages. So you shouldn’t
connect another SMS-compatible phone to the same
line as your DECT 1915/1915+1.
Radio signals
between
handset and
base unit To use your handset and base unit together, you must
be able to establish a radio link between them. Be
aware that:
■ Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
■ Other solid structures, like walls, may reduce the
signal strength.
Mains power
connection IMPORTANT — The DECT 1915/1915+1 base unit and
charger pod must be used with the mains adapter
supplied with the unit. Using any other adapter will
invalidate any approval given to this apparatus.
3