Uniden DECT1915 - Manual (Page 14)

Your handset’s name
Before you start to use your DECT 1915/1915+1 handset,
especially if you have a multi-handset system, you’ll
probably want to personalise the display with your name.
The name can have up to eight characters (including
spaces).
To change the
name In idle mode:
1 Press the right Soft button to select Menu
2 Press the
‡
or
ˆ
button to scroll to
Handset
3 Press the right Soft button to select OK
4 Press the ‡ or ˆ button to scroll to
Name Handset and select OK
u The display shows the current handset
number and name (the default is
).
5 Use the left Soft button [ Clear ] to clear
letters from the display, then key in your
chosen handset name
There’s a list of the buttons to use for different
characters, at the back of this guide.
By default, the first letter of each word you key
in will be upper-case (capital) and the other
letters will be lower-case. If you don’t want the
letters like that, press the
✱ (star) button to
switch between upper and lower case.
5 When you’ve finished, press the right Soft
button to select
OK
6 Press the left Soft button [ Back ] twice to go
back to idle mode
BASIC USE
11
Handset