Uniden DECT1915 User Manual
Page 33
To select a
base unit
If your handset is registered to more than one
base unit, it will automatically select the one
with which it can best set up a radio link
(usually the nearest one). Or you can select a
base unit manually.
You don’t need this function if you have
only one base unit.
1
Press the right Soft button [
Menu
], then
press the
or
button to scroll to
Handset
2
Press the right Soft button [
OK
]
3
Press the
or
button to scroll to
Select Base,
then press the right Soft
button [
OK
]
u The display shows a list of base units. The
currently selected base unit (or
Best Base
for
automatic selection), has a tick next to it.
4
Move the highlight to the base unit number
you want, or to
Best Base
, then press the
right Soft button [
OK
]
u The display may show
No base found
for a
few moments, then it should return to standby
mode. If it continues to show
No base found
,
you’ll need to select a different base unit, or
Best Base
for automatic selection.
!
We recommend that you leave this setting at
Best Base
(the default) if you want your handset
to work with more than one base unit.
Handset registration
30