Uniden DECT1915 - Manual (Page 28)

Using a multi-handset system
If you have a DECT 1915/1915+1 multi-handset system,
registered, you can:
—
■ make intercom calls from one handset to another
■ transfer an outside call from one handset to another
■ shuttle between an outside call and an intercom call
■ set up a three-way conference call
Each handset’s number ( 1 to 6 ) is shown on its display.
! Only one handset can be connected to the outside
line at once. If you try to make a call while another
handset is already using the line, you’ll hear rapid
‘beeps’ and the display will show
Line busy .
To make an
intercom call
in this example,
handset 1 is
calling handset 2)
1 Press and hold the INT ✱ button for 1 second
u The display a list of handset numbers
2 Key in a handset number
u The display shows
Handset 1 calls
Handset 2 . Handset 2 rings with Intercom
melody and its display shows Internal call!
and the name and number of the calling handset.
3 Press any button (except HANG UP) on the
ringing handset to answer the call
To end an
intercom call ◗ Press the HANG UP button;
or simply replace the handset on the
base unit or charger pod
u The other handset beeps rapidly. The user
can press the HANG UP button or simply wait
a moment for the display to return to standby
mode.
25
you can register additional handsets altogether, up to
six handsets per base unit. With two or more handsets