Uniden DECT1915 - Manual (Page 16)

Making and answering calls
To make a
call 1 Key in the telephone number
If you make a mistake, press the left Soft button
[
Clear ] to clear digits from the display.
2 Press the PHONE button
(You can dial the number after you press the
PHONE button to get Dial tone if you prefer,
but you won’t be able to correct any mistakes
if you do it this way.)
u After a few seconds, the display shows the
call’s duration in minutes and seconds.
To answer a
call When there’s an incoming call, Incoming Call! or the
phone number (if you subscribe to Caller Display: see
page 22) appears on the display; if the number is stored
in your Phone Book (see page 17), the caller’s name may
also appear.
The base unit and handset ring (unless the ringer is
turned off). If you’ve stored the caller’s number as a VIP
entry in the Phone Book (see page 18) and you sub-
scribe to Caller Display, the handset will ring with a
special melody.
◗ Press any button (except the HANG UP button) to
answer the call
Note — you may notice that the DECT 1915/1915+1 starts
ringing a few moments after any other phone you have
connected to your line. This is not a fault — it’s part of
the design of the system, to enable it to receive SMS
text messages.
à … and if you
don’t want to
answer You can silence the ringing by pressing the left
Soft button to select
Silent .
BASIC USE
13