Uniden DECT1915 - Manual (Page 3)

INT (Intercom) button
Press and hold for 1 second to
make an intercom call (if you
have more than one handset).
Where to find it
CHARGE light
This comes on when the
handset’s batteries are
being charged.
PHONE button
Press to begin or answer a phone call.
Press during a call to switch the
speakerphone on and off.
(Note: the speakerphone won’t work if
the batteries are low.)
Left and right Soft buttons
Press to select the functions shown
above them on the display (for
example,
or ). Redial Menu
Headset socket
(Headset is not available for this model)
If the display is blank
Press the button to switch the handset on
Display
For details of how to change the screen
background, refer to the
functions in the section headed ‘Quick
reference guide to the menus’.
Extra menu
Before you can use the handset to make calls you will need to fit
and fully charge the batteries, as described on pages 4 to 6.
HANDSET LOCATOR button
Press to make all registered handsets
ring (useful if you've forgotten
where you put a handset).
F(Flash) button #
You may need this during a call if your DECT 1915/1915+1
is connected to a PBX, or if you use a Call Waiting service
provided by your network provider.
IN USE light
This comes on when you have a
connection to the telephone line.
Arrow buttons
Press or
Press to navigate through the menu on the
display.
Press in idle mode for short-cut functions —
‡ ˆ during a call to adjust the
volume in the earpiece.
to go straight to the
menu.
SMS text
messages
to display a showing
today’s date.
calendar
to go straight to a list of
(CID) records.
Caller
Display
to go straight to a list of
entries.
Phone
Book
HANG UP /C/ button
Press to end a call.
Press while using menus to cancel and
return to idle mode.
Press and hold for 4 seconds to turn
the handset on and off.
Press and hold for 2 seconds to lock
and unlock the keypad.
Short cuts
To subscribe to network features like Caller Display and Call Waiting,
simply call your network service provider (the company which
supplies your telephone line). You don’t need to do anything special
to set these features up. on your DECT 1915/1915+1 phone
PBX: Press and hold this button for a Flash signal.
CW: If the Call Waiting tone sounds during a call Press and
hold this button then 2 to switch between callers.
F