Uniden DECT1915 - Manual (Page 51)

“I cannot make
a call.”
The handset’s keypad may be locked (see page 7).
Unlock it before you make a call.
Call barring may have been set and turned on (see
page 42).
“When I press
keys, nothing
happens.”
Make sure the batteries are fitted in your handset. If
the Battery Level symbol on the display shows ‘low’,
recharge the batteries.
“When I key in a
number, it
appears on the
display, but I
can’t make an
outside call.”
Try moving the handset closer to the base unit.
Try a different position for the base unit — somewhere
higher if possible, or further from other electrical
equipment.
Call barring may have been set and turned on (see
page 42).
“The phone
does not ring”
Check that the base unit’s mains power adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the telephone line cable that
was supplied with your DECT 1915/1915+1. Other
telephone line cables might not work.
Check that the total REN value of all equipment
connected to your telephone line is no more than 3 (see
page 2). Disconnect one or more telephones and see
whether that helps.
“My call was cut
off when I went
out of range.
Now I can’t use
my handset.”
Move the handset closer to the base unit before you try
again to make a call.
Troubleshooting
48