Uniden DECT2080 - Manual (Page 52)

5
Symptom Suggestion
The.handset.doesn’t.
communicate.with.other.
handsets..
Make.sure.that.you.have.registered.all.handsets.to.the.same.base,.and.all.
handsets.are.selecting.the.base.(see.page.2).
•
An.extra.handset.can’t.join.
the.conversation.
Make.sure.there.are.not.two.handsets.already.using.the.conference.feature.
Make.sure.that.another.handset.is.not.in.privacy.mode.
Make.sure.that.you.have.registered.both.handsets.to.the.same.base,.and.both.
handsets.are.selecting.the.base.(see.page.2).
•
•
•
The.answering.system.does.
not.work.
Make.sure.the.base.is.plugged.in.
Make.sure.that.the.answering.system.is.turned.on.
Make.sure.that.the.message.record.time.is.not.set.to.announce.only.
•
•
•
Time.stamp.cannot.be.heard.. Make.sure.you.have.set.the.time.(see.Setting.the.Day.and.Time.on.page.40). •
Messages.are.incomplete..
Incoming.messages.may.be.too.long..Ask.callers.to.leave.a.brief.message.
The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages..
•
•
There.is.no.sound.on.the.
base.or.handset.speaker.
during.call.monitoring.or.
message.review.
Adjust.the.speaker.volume.on.the.base.or.handset.
Make.sure.the.call.screen.feature.is.set.to.on.
•
•
Cannot.access.answering.
system.from.a.remote.
phone..
Make.sure.you.are.using.the.correct.PIN.number.
Make.sure.that.the.touch-tone.phone.you’re.using.can.transmit.the.tone.for.at.
least.two.seconds..If.it.cannot,.try.using.a.different.touch-tone.phone.
•
•
Weak or Hard to Hear Audio
If.the.caller’s.voice.sounds.weak.or.soft,.the.signal.might.be.blocked.by.large.metal.objects.or.walls;.you.might.also.
be.too.far.from.the.base,.or.the.handset’s.battery.may.be.weak.
Try.adjusting.the.volume.of.the.earpiece.(see.page.32).or.the.audio.tone.(see.page.33).
Try.moving.around.while.you’re.on.a.call.or.moving.closer.to.the.base.to.see.if.the.sound.gets.louder.
Make.sure.the.handset’s.battery.is.fully.charged.
•
•
•
UC536BV(DECT2080-2) OM.indb 51 3/24/2008 4:54:12 PM