Uniden DECT2080 - Manual (Page 34)

33
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:
While.on.a.call,.press.[Menu/Select].
Move.the.cursor.to.select.AUDIO.TONE,.and.then.press.[Menu/Select].
Move.the.cursor.to.select.desired.option.(HIGH.TONE,.NATURAL.TONE,.or.LOW.TONE),.and.then.press.
[Menu/Select]
..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.
Finding a Lost Handset
To.locate.a.misplaced.handset,.press. [find hs].on.the.base.when.the.phone.is.in.standby..The.handsets.connected.
to.the.paging.base.will.beep.for.one.minute,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.
[find hs].again.or.any.key.on.the.found.handset.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
During.a.call,.press.[Clear/Int’com].on.the.handset.to.place.the.caller.on.hold..If.you.leave.a.caller.on.hold.for.
more.than.ten.seconds,.the.display.screen.will.read,.Line.On.Hold.
To.return.to.the.party.on.hold,.press.[ /Flash].or.[
]
.on.a.handset..The.phone.will.return.to.the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected.and.the.phone.will.return.to.standby.
. •.While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.
)
2)
3)
)
2)
UC536BV(DECT2080-2) OM.indb 33 3/24/2008 4:54:05 PM