Uniden DECT2080 - Manual (Page 21)

20
Registering Accessory Handsets
If.you.purchase.an.accessory.handset,.you.need.to.register.the.handset.before.use..Handset(s).supplied.in.the.box.
with.the.base.are.pre-registered.at.the.factory..When.charged,.pre-registered.handsets.display.a.handset.ID.number..
Handsets.that.have.not.been.registered.display:
..
↔ .
.
To.register.a.DCX200.accessory.handset:
Charge.the.handset.for.5-20.hours.
Place.the.handset.in.the.main.telephone.base.cradle.to.initiate.registration..HANDSET.REGISTERING.will.
appear.in.the.LCD..
Wait.approximately.thirty.seconds,.REGISTRATION.COMPLETE.will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.
To.register.a.DWX207.or.DCX300.accessory.handset:
Charge.the.handset.for.5-20.hours.
Disconnect.the.base.AC.adapter..
Press.and.hold.
[find hs].while.you.reconnect.the.adapter.until.the.charge.LED.starts.to.blink.
On.the.handset,.press.[Menu/Select]..Select.the.REGISTER.BASE.menu..HANDSET.REGISTERING.will.
appear.in.the.display..(After.step.3,.you.have.thirty.seconds.to.complete.this.step.4.before.the.system.returns.to.
standby.)
When.the.handset.has.registered.to.the.base,.the.LCD.will.display.REGISTRATION.COMPLETE.then.show.the.
handset.ID.number.
If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.
Note:. If.an.accessory.handset.has.ever.been.registered.to.a.base,.you.must.reset.the.handset.before.you.can.
register.it.to.a.new.base..See.Resetting.the.Handset.on.page.48.
)
2)
3)
)
2)
3)
4)
5)
UC536BV(DECT2080-2) OM.indb 20 3/24/2008 4:53:57 PM