Uniden DECT2080 - Manual (Page 16)

5
Connecting to the Phone Line
Once.the.battery.pack.is.fully.charged,.route.the.telephone.
cord.through.the.“LOOP”.of.base’s.back.as.shown,.and.
connect.the.telephone.cord.to.the.TEL LINE.jack.
Connect.the.telephone.cord.to.a.telephone.wall.jack.
Testing the Connection
Try.making.a.call..If.your.call.does.not.connect.or.you.cannot.
get.a.dial.tone,.try.the.following.steps:
Make.sure.the.AC.adapter.cord.is.securely.connected.to.
the.DC IN 9V.jack.and.a.standard.power.outlet.
Check.to.make.sure.the.battery.is.fully.charged..(If.you.
don’t.see.the.“battery.full”.icon,.check.to.make.sure.the.
battery.is.properly.connected).
Change.the.dial.mode.
Changing the Dial Mode
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dialing.or.pulse.dialing..These.
days,.most.base.networks.use.a.method.called.tone.dialing,.so.your.phone.comes.programmed.for.tone.dialing..If.
your.phone.company.uses.pulse.dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.don’t.get.a.dial.tone.
or.can’t.connect.to.the.telephone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:
Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.
DIAL.MODE.submenu.
Scroll.[
]
.to.highlight.PULSE.
Press.[Menu/Select]. You will hear a confirmation tone.
If.you.ever.need.to.change.the.dial.mode.back.to.tone.dialing,.follow.the.same.procedure,.but.select.TONE.in.step.2.
Note:. If.you.have.multiple.bases,.select.the.base.before.changing.the.dial.mode.(see.Selecting.the.Base.on..
page.2).
)
2)
)
2)
3)
)
2)
3)
To telephone wall jack
To TEL LINE
Telephone cord
(supplied)
Route the cord.
To telephone wall jack
To TEL LINE
Telephone cord
(supplied)
Route the cord.
D i a l M o d e
T o n e
P u l s e D i a l M o d e
T o n e
P u l s e
UC536BV(DECT2080-2) OM.indb 15 3/24/2008 4:53:54 PM