Uniden DECT2080 - Manual (Page 17)

6
Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.wall.plate.
Snap.the.wall.mount.adapter.into.the.notches.on.the.base’s.back.
Plug.the.AC.adapter.into.the.DC IN 9V.jack.
Plug.the.AC.adapter.into.a.standard.20V.AC.wall.outlet.
Plug.the.telephone.cord.into.the.TEL LINE.jack.
Route.the.telephone.cord.through.the.hole.of.the.wall.mount.
adapter.as.shown.
Plug.the.telephone.cord.into.the.telephone.wall.jack.
Align.the.mounting.slots.on.the.base.with.the.mounting.posts.on..
the wall. Then push in and down until the phone is firmly seated.
Notes:
DO.NOT.use.an.AC.outlet.controlled.by.a.wall.
switch.
To.mount.the.phone.directly.on.the.wall,.insert.two.
#0.screws.(minimum.length.of.. 3 /
8
.inches,.not.
supplied).into.the.wall,.3. 5 /
6
.inches.apart;.leave.
the.screw.heads. /
8
.inch.away.from.the.wall.to.allow.
room.for.mounting.the.phone..Be.sure.the.wall.is.
capable.of.supporting.the.weight.of.the.phone,.and.
use.the.proper.type.of.anchoring.device.for.the.
wall.material..No.need.to.route.the.telephone.cord.
through.the.hole.of.the.wall.mount.adapter.when.
mounting.directly.on.the.wall.
)
2)
3)
4)
5)
6)
7)
•
•
AC adapter (supplied)
Wall plate
AC outlet
Route the cord.
AC adapter (supplied)
Wall plate
AC outlet
Route the cord.
UC536BV(DECT2080-2) OM.indb 16 3/24/2008 4:53:55 PM