Led indications – Toshiba Integrated High Definition DLP 62HM15 User Manual

Page 94

62HM15

LED Indication

Condition

Solution

1) Green blinks 3 times

The TV is warming up.

Wait about 30 seconds until the Green LED lights continuously,

after power cord is

and then press POWER to turn ON the TV.

plugged in;
Red is OFF.

2) Green is ON (solid);

The lamp unit door is not seated

Turn OFF the TV and unplug the power cord. Review “How to

Red blinks continuously

properly.

replace the lamp unit” on pages 99–100 to ensure that the lamp unit

at 0.5-second intervals.

door is installed securely. If the problem persists, contact a Toshiba
Authorized Service Center.

3) Green blinks continuously The lamp is not working properly.

The TV automatically will try to restart itself eight times (see item #4).

at 0.3-second intervals;
Red is ON (solid).

4) Green and Red blink

The lamp is not working properly

Turn OFF the TV and then ON again. If the problem persists, replace

continuously at

after the eighth automatic restart

the lamp unit (see pages 98–100). If the problem still persists,

1-second intervals.

(see item #3).

contact a Toshiba Authorized Service Center.

5) Green and Red blink

An abnormal temperature

Turn OFF the TV. Check to make sure all slots and openings in the

3 times only.

increase has occurred.

TV cabinet are not covered, blocked, or dusty. Turn ON the TV again.
If the problem persists, contact a Toshiba Authorized Service Center.

6) Green is OFF;

The TV requires servicing.

Turn OFF the TV and unplug the power cord. Plug the power

Red blinks continuously

cord in again and turn ON the TV. If the problem persists, contact

at 0.5-second intervals.

a Toshiba Authorized Service Center.

Chapter 10: Troubleshooting

VOLUME

CHANNEL

EXIT

TV/VIDEO

POWER

LED indications

The green and red LED lights are on the TV front touchpad, to the left of the POWER button.
The green and red LED lights on the TV control touchpad (on the lower right corner of the TV screen) indicate the TV’s current status, as
follows:

• Green ON (solid) and Red OFF = TV power cord is plugged in but the TV is OFF. This is called standby mode.
• Red ON (solid) and Green OFF = TV power cord is plugged in and the TV is ON.
• Green and Red ON (solid) = TV front touchpad is being pressed.
• Green and/or Red blinking (see table below).

VOLUME

CHANNEL

EXIT

TV/VIDEO

POWER

Red LED

Green LED

TV front touchpad

#01E092-097_62HM15

5/24/05, 6:22 PM

Black